LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Standard >> Repair and Diagnosis (Single Page) >> General Information >> OEM General Information >> Warnings And Cautions >> Introduction >> Service Programming System (SPS) Notice

Service Programming System (SPS) Notice

NOTE: Before programming a control module, the following must be observed or control module damage may occur:
  • The Tech 2 and the terminal must have the latest software.
  • The vehicle battery must be fully charged. The battery voltage should be between 12-14 volts.
  • The Tech 2 and the terminal cable connections must be secure.
  • A battery charger must NOT be connected to the battery when programming a control module.
scientia non olet · About LEMON Manuals