LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Regulator Handle Replacement - Door >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the window to the full up position.
    2. Fig 1: Identifying Door Handle Clip Remover
    GM5087Courtesy of GENERAL MOTORS CORP.
  2. Remove the window regulator handle from the door by inserting tool J 9886-01  between the handle and the white plastic washer. See Special Tools .
  3. Align the J 9886-01  with the handle. See Special Tools .
  4. Push the J 9886-01  in order to disengage the clip. See Special Tools .
  5. Pull the handle from the door.
    6. Fig 2: View Of Window Regulator Handle
    GM1305344Courtesy of GENERAL MOTORS CORP.
  6. Remove the window regulator handle from the door.
  7. Remove the bearing plate from the door.
scientia non olet · About LEMON Manuals