LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Rear Suspension System) >> Repair Instructions >> Leaf Spring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the rear axle independently in order to relieve the tension on the leaf springs.
  3. Disconnect the rear park brake cable. Refer to Park Brake Cable Replacement - Left Rear or to Park Brake Cable Replacement - Right Rear in Park Brake.
  4. Remove the absorber lower mounting nut and bolt. Refer to Shock Absorber Replacement .
  5. Remove the trailer hitch if equipped. Refer to Trailer Hitch Replacement in Frame and Underbody.
    6. Fig 1: View Of U-Bolts, Anchor Plate & Nuts
    GM941629Courtesy of GENERAL MOTORS CORP.
  6. Remove the U-bolt nuts.
  7. Remove the anchor plate.
  8. Remove the U-bolts.
    9. Fig 2: View Of Rear Spring Hanger Bracket Bolts & Nuts
    GM941646Courtesy of GENERAL MOTORS CORP.
  9. Remove the rear spring hanger bracket nut and bolt.
    10. Fig 3: View Of Front Spring Bracket Bolt
    GM941641Courtesy of GENERAL MOTORS CORP.
  10. Remove the front spring bracket bolt.
    11. Fig 4: View Of Leaf Spring Assembly
    GM941584Courtesy of GENERAL MOTORS CORP.
  11. Remove the leaf spring assembly from the vehicle.
scientia non olet · About LEMON Manuals