LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Exhaust System) >> Repair Instructions >> Exhaust Hanger Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Exhaust Service Caution in Cautions and Notices.
CAUTION: Refer to Protective Goggles and Glove Caution in Cautions and Notices.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Exhaust Pipe Hanger, Frame Support Bracket Rod & Exhaust Pipe Hanger Rod
    GM1313623Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not use oil base lubricants.
  2. Apply a soapy solution to the following in order to ease the removal of the hanger (1):
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
  3. Pry the exhaust pipe hanger (1) free from the following:
    • The frame support bracket rod (2)
    • The exhaust pipe hanger rod (3)
scientia non olet · About LEMON Manuals