LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Manual Transmission Clutch System) >> Repair Instructions >> Pilot Bearing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Clutch Pilot Bearing
    GM1302138Courtesy of GENERAL MOTORS CORP.
  1. Install the J 45949  (3) into the clutch pilot bearing (1).
  2. Install the clutch pilot bearing (1) into the crankshaft (2).

    The J 45949  (3) will install the pilot bearing (1) to the proper depth of 11.6 mm (0.457 in) (a).

  3. Remove the J 45949  (3).
  4. Install the Flywheel. Refer to Engine Flywheel Replacement (M30) or Engine Flywheel Replacement (MA5) in Engine Mechanical-2.8L or Engine Flywheel Replacement (M30) or Engine Flywheel Replacement (MA5) in Engine Mechanical-3.5L.
scientia non olet · About LEMON Manuals