Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rearview Mirror

Courtesy of GENERAL MOTORS CORP.

Slide the mirror downward onto the windshield support button.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the set screw (3).
Tighten: Tighten the set screw to 2 N.m (18 lb in).
Connect the electrical connector (1), if removed.
Pull the mirror downward and install the electrical harness cover (2).
Reposition the mirror (4).