LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Seat System) >> Repair Instructions >> Cupholder Replacement - Front Seat >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Cupholder Bracket Bolts
    GM1333099Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the 3 bolts (1) securing the cupholder bracket to the seat frame.

    Tighten:  Tighten the cupholder bracket bolts to 9.1 N.m (80 lb in).

    2. Fig 2: View Of Cupholder
    GM1333098Courtesy of GENERAL MOTORS CORP.
  2. Install the cupholder to the seat by pushing it straight onto the bracket.
  3. Install the seat in the vehicle. Refer to Seat Replacement - Split Bench .
scientia non olet · About LEMON Manuals