LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Condenser Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: If replacing the condenser, add the refrigerant oil to the condenser. Refer to Refrigerant System Capacities  for the capacity information.
  1. Install the condenser to the radiator.
  2. If replacing the condenser, transfer the components from the old condenser as necessary.
    3. Fig 1: View Of Condenser
    GM753683Courtesy of GENERAL MOTORS CORP.
  3. Install the condenser to the mounts on the radiator.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the condenser retaining bolts to the radiator.

    Tighten:  Tighten the bolts to 28 N.m (21 lb ft).

  5. Install the radiator. Refer to Radiator Replacement in Engine Cooling.
  6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging .
  7. Leak test the fittings of the components using the J 39400-A  . See Special Tools .
scientia non olet · About LEMON Manuals