LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement (Power Seat) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Seat Position Switch (Power Seat)
    GM1334868Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the seat position sensor (1) to the seat rail with 2 nuts (2).

    Tighten:  Tighten the seat position sensor nuts to 9 N.m (79 lb in).

  2. Connect the electrical connector (13) to the seat position sensor (1).
  3. Install the seat in the vehicle. Refer to Seat Replacement - Front Bucket or Seat Replacement - Split Bench in Seats.
scientia non olet · About LEMON Manuals