LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Steering Wheel & Steering Column) >> Repair Instructions >> Ignition Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the switch mounting plate. Refer to Multifunction Turn Signal Switch Housing Replacement .
  3. Remove the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
    4. Fig 1: View Of Ignition Switch & Lock Housing Assembly
    GM1492304Courtesy of GENERAL MOTORS CORP.
  4. Remove the shear bolt from the ignition switch and lock housing assembly.
  5. Remove the ignition switch and lock housing assembly.
scientia non olet · About LEMON Manuals