TPMS Reminder Reset - Procedure 17: Notes
WARNING: This page does not describe the selected car, but rather 2526 other vehicles, including the 2025 Honda Ridgeline, 2025 Honda Prologue, 2025 GMC Yukon XL, 2025 GMC Yukon, and 2025 GMC Terrain. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When a spare tire is mounted, a wheel is replaced or rotated, or tire pressure has been adjusted, TPM system will need to be recalibrated.
NOTE:
When the low tire pressure warning messages appear, immediately check air pressure of all tires and adjust to the specified pressure. If warning messages are still displayed, there is a malfunction in the TPM system. See appropriate manufacturer service information.
NOTE:
Under the following conditions, the system may not function properly:
- More than one tire is low.
- Only one tire is replaced with a new tire during service.
- Vehicle is moving faster than 65 mph (105 km/h).
- The system is not yet calibrated.
- Tire treadwear is uneven.
- Compact spare tire is installed.
- Tire chains are being used.
- Vehicle is being driven on a rough or frozen road.
- If ABS warning light is on.
CAUTION:
DO NOT recalibrate TPM system until all problems are fixed and tire pressure in all 4 tires has been adjusted. If recalibration is done when tire pressures are incorrect, TPM system will not work properly and may not set an alert when a tire pressure is low or high.
NOTE:
There are 2 ways to recalibrate the Tire Pressure Monitor (TPM) system:
- Using DIC Reset Button (if no scan tool is available)
- Using Scan Tool (if an OBD-II compatible scan tool is available).