LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Insulator Replacement >> Installation Procedure

Installation Procedure

  1. Install the insulator (1) to the instrument panel.
    2. Fig 1: Locating I/P Insulator Retaining Bolts
    GM787371Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the retaining bolts.

    Tighten:  Tighten the bolts to 1.6 N.m (14 lb in).

scientia non olet · About LEMON Manuals