Removal Procedure

CAUTION: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

Fig 1: View Of Negative Battery Cable At Battery

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Fig 2: View Of Generator Cable & Nut

Courtesy of GENERAL MOTORS CORP.

Remove the generator cable from the generator, perform the following:
1. Reposition the boot to expose the stud.
2. Remove the generator cable nut.
3. Remove the generator cable from the stud.

Fig 3: View Of Battery Cables At Junction Block

Courtesy of GENERAL MOTORS CORP.

Open the positive cable junction block.
Remove the generator cable nut.
Remove the generator cable (2) from the junction block.