LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Functions >> Repair Instructions >> Garage Door Opener Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: Button & Module Assembly
    GM827780Courtesy of GENERAL MOTORS CORP.
  1. Install the button and module assembly to the overhead console (1).
    2. Fig 2: Garage Door Module Screws
    GM815910Courtesy of GENERAL MOTORS CORP.
  2. Align the module and screws into the overhead console.

    Tighten:  Tighten the screws to 8 N.m (70 lb in).

    3. Fig 3: Connecting Individual Connectors To Garage Door Module
    GM827784Courtesy of GENERAL MOTORS CORP.
  3. Connect the individual connectors to the garage door module.
    4. Fig 4: Overhead Console Screws (Short Length)
    GM827786Courtesy of GENERAL MOTORS CORP.
  4. Fasten the overhead console to the headliner.
  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals