LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Pedal Stud, Stop Lamp Switch, Pushrod & Retaining Clip
    GM344194Courtesy of GENERAL MOTORS CORP.
  1. Install the stop lamp switch (2).
  2. Install the pushrod retaining clip (4).
  3. Connect the electrical connector to the stop lamp switch (2).
scientia non olet · About LEMON Manuals