LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular, Entertainment, And Navigation >> Repair Instructions >> OnStar Button Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Install electrical connector from three button faceplate to communication interface module.
    2. Fig 1: Electrical Connector & Three Button Faceplate
    GM862352Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Tighten screws that hold three button faceplate to communication interface module.

    Tighten:  Tighten screws to 2 N.m (18 lb in).

    3. Fig 2: Communication Interface Module & I/P
    GM815865Courtesy of GENERAL MOTORS CORP.
  3. Install communication interface module to instrument panel. Refer to Communication Interface Module Replacement .
  4. Install center bezel and move forward center console. Refer to Console Replacement .
scientia non olet · About LEMON Manuals