LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2007 >> H2 4D Utility Pickup >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communications >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Body Control Module
    GM832814Courtesy of GENERAL MOTORS CORP.
  1. Install the BCM (1) into the bracket.
  2. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement .
  3. Connect the battery negative cables. Refer to Battery Negative Cable Disconnection and Connection .
  4. Setup the BCM customized options. Refer to Body Control System Description and Operation .
scientia non olet · About LEMON Manuals