LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H3 Standard >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Multifunction Turn Signal Switch Housing Replacement >> Installation Procedure

Installation Procedure

  1. Slide the multifunction turn signal switch housing over the steering column shaft.
    NOTE: Notice: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 2 multifunction turn signal switch housing bolts.
  3. Tighten the bolts to 2.5 Nm (22 lb in).
  4. Install the turn signal multifunction switch. Refer to Turn Signal Multifunction Switch Replacement  .
  5. Enable the SIR system. Refer to SIR DISABLING AND ENABLING in SIR.
scientia non olet · About LEMON Manuals