LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H3 Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical - 3.5L (L52).
    2. Fig 1: Starter Wiring
    GM1560047Courtesy of GENERAL MOTORS CORP.
  2. Remove the starter solenoid S terminal nut and disconnect the lead from the starter.
  3. Remove the starter terminal nut (1) and disconnect the positive battery cable (2) from the starter.
    4. Fig 2: View Of Starter Motor
    GM1313646Courtesy of GENERAL MOTORS CORP.
  4. Remove the starter motor nut (1) and bolt (4).
  5. Remove the starter motor (3).
scientia non olet · About LEMON Manuals