LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H3 Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Wheel And Column >> Repair Instructions >> Steering Wheel Replacement >> Removal Procedure

Removal Procedure

  1. Set the front wheels in the straight-ahead position.
  2. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  3. Lock the steering column through the access hole in the lower steering column trim cover using J 42640  . See Special Tools .
  4. Remove the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  5. Make an alignment mark in order to note the relationship of the steering wheel to the steering shaft.
    6. Fig 1: View Of Steering Wheel Electrical Connectors
    GM1373038Courtesy of GENERAL MOTORS CORP.
  6. Loosen the steering wheel nut 2 complete revolutions.
  7. Carefully unseat the steering wheel from the steering column.
  8. Remove the steering wheel nut (2).
  9. Remove the steering wheel from the steering column.
scientia non olet · About LEMON Manuals