Revised Wheel Alignment Specifications (06-03-07-001)
Publication date: 2006-02-14Reference number: 06-03-07-001
Revised Wheel Alignment Specifications
TECHNICAL SERVICE BULLETIN
Reference Number(s): 06-03-07-001, Date of Issue:
February 14, 2006
| Affected Model(s): | 2006 HUMMER H3 |
SERVICE INFORMATION
This bulletin is being issued to revise the Wheel Alignment Specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Wheel Alignment Specifications
| Truck Line | Caster +/- 1.0 Degree | Cross Caster (L - R) +/- 0.75 Degree |
Camber +/- 0.6 Degree | Cross Camber (L - R) +/- 0.6 Degree |
Total Toe +/- 0.20 Degree | Steering Wheel Angle +/- 3.5 Degree | ||
|---|---|---|---|---|---|---|---|---|
| Left | Right | Left | Right | |||||
| H3 | 2.80° | 3.10° | -0.30° | 0.00° | 0.00° | 0.00° | 0.00° | -1.0° |