LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H3 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Engine Control System - 2.8L (LK5) - Introduction) >> Repair Instructions >> Fuel Tank Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2005 GMC Canyon and 2005 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel filter. Refer to Fuel Filter Replacement .
    2. Fig 1: View Of Fuel Tank Module, Fuel Pipes, & EVAP Pipes
    GM1361716Courtesy of GENERAL MOTORS CORP.
  2. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to disconnect the following from the fuel tank module (2):
    • The EVAP pipe (5)
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  3. Disconnect the EVAP pipes (3, 5) from the vent valve (4). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Disengage the following from the retaining clips (1):
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  5. Disengage the EVAP pipe (5) from the retaining features molded into the fuel tank.
  6. Remove the fuel tank module from the fuel tank. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals