LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Sir >> Repair Instructions >> Inflatable Restraint Instrument Panel Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Inflatable Restraint I/P Module
    GM832804Courtesy of GENERAL MOTORS CORP.
  1. Install the inflatable restraint I/P module (1) to the mounting bracket through the front of the instrument panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fasteners (2) to the inflatable restraint I/P module.

    Tighten:  Tighten the fasteners to 10 N.m (89 lb in).

  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
  4. Install the yellow connector to the I/P.
  5. Install the trim panel to the substraight. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals