LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors >> Repair Instructions >> Front Side Door Outside Handle Replacement >> Installation Procedure

Installation Procedure

  1. Position the door handle in place on the door.
    2. Fig 1: Front Outside Door Handle
    GM838664Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 nuts (1) that retain the door handle to the door.

    Tighten:  Tighten the nuts to 9 N.m (7 lb ft).

    3. Fig 2: Front Outside Door Handle Rod
    GM838657Courtesy of GENERAL MOTORS CORP.
  3. Connect the outside door handle rod (1) by securing the retention clip (2).
    4. Fig 3: Lock Cylinder Rod
    GM838673Courtesy of GENERAL MOTORS CORP.
  4. Connect the lock cylinder rod by securing the retainer clip (1).
  5. Install the window. Refer to Front Side Door Window Replacement .
  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
  8. Operate the door handle to check for proper operation.
scientia non olet · About LEMON Manuals