LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Doors >> Repair Instructions >> Door Striker Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Door Lock Striker
    GM838823Courtesy of GENERAL MOTORS CORP.
  1. Align the striker with the alignment marks made with the grease pencil.
    2. NOTE: Refer to Fastener Notice .
  2. Install the fasteners retaining the striker to the door frame.

    Tighten:  Tighten the fasteners to 27 N.m (20 lb ft).

  3. Operate the door to check for proper operation and alignment.
scientia non olet · About LEMON Manuals