LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Front Seat Trim Panel Replacement >> Installation Procedure

Installation Procedure

  1. Position the trim panel on the seat.
    NOTE: Refer to Fastener Notice .
    2. Fig 1: View Of Front Seat Trim Panel
    GM833483Courtesy of GENERAL MOTORS CORP.
  2. Instal the trim panel (1) to the seat by pushing in until the retaining clips are locked in place.
  3. Install the screws retaining the seat back release handle and the seat recliner handle to the seat, if removed.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals