LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2006 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Off Road Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Off-Road Lamp Switch
    GM1252325Courtesy of GENERAL MOTORS CORP.
  1. Position the switch (3) into the opening in the overhead console.
  2. Install the nut (2) onto the switch (3).
  3. Tighten the nut (2) until fully seated not stripped.
  4. Connect the wires (1) to the terminals on the switch (3) as noted in the removal procedure.
  5. Install the overhead console. Refer to Roof Console Replacement (Full Length) or Roof Console Replacement (Short Length) in Interior Trim.
scientia non olet · About LEMON Manuals