LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2005 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Transmission >> Transfer Case - BW 4484 >> Repair Instructions >> Transfer Case Speed Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Speed Sensor Electrical Connector
    GM860433Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the electrical connector from the speed sensor.
    3. Fig 2: View Of Vehicle Speed Sensor (VSS) & O-Ring Seal
    GM819577Courtesy of GENERAL MOTORS CORP.
  3. Remove the speed sensor and the O-ring from the transfer case.
scientia non olet · About LEMON Manuals