Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sunshade Elbow & Secondary Retainer

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector for the vanity mirror.
Pull outward on the bezel (1) and rotate until the elbow (3) and bezel are flush with each other.

Fig 2: Sunshade & Bezel

Courtesy of GENERAL MOTORS CORP.

Align the sunshade bezel (3) to the opening in the headliner (1) and the locking ring (2).

Fig 3: Pushing Sunshade Up Into Locking Ring & Body

Courtesy of GENERAL MOTORS CORP.

Push the sunshade up until it locks into the locking ring and body.
An audible click will be heard.