LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Seats) >> Repair Instructions >> Seat Back Frame Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Rear Seat Back Frame
    GM276335Courtesy of GENERAL MOTORS CORP.
  1. Install the seat-back frame (4) to the seat cushion frame.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts which retain the seat-back frame to the seat cushion frame.

    Tighten:  Tighten the bolts to 35 N.m (26 lb ft).

  3. Install the seat-back cover. Refer to Seat Back Cover and Pad Replacement - Rear .
  4. Install the armrest to the seat back. Refer to Armrest Replacement - Rear Seat .
  5. Install the seat to the vehicle. Refer to Seat Replacement - Rear No. 1  or Seat Replacement - Rear No. 2 .
scientia non olet · About LEMON Manuals