LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 710 (Seats) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the lumbar switch to the power seat switch bezel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the lumbar switch screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 1: Installing Power Seat Switch Bezel & Lumbar Switch
    GM409526Courtesy of GENERAL MOTORS CORP.
  3. Install the power seat switch bezel (1) to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About LEMON Manuals