Installation Procedure
WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the switch (3) into the opening in the overhead console.
- Install the nut (2) onto the switch (3).
- Tighten the nut (2) until fully seated not stripped.
- Connect the wires (1) to the terminals on the switch (3) as noted in the removal procedure.
- Install the overhead console. Refer to Console Replacement - Overhead (Full Length) or Console Replacement - Overhead (Short Length) in Interior Trim.