LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Lighting Systems) >> Repair Instructions >> Instrument Panel (I/P) Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: This procedure calls for the replacement of incandescent bulbs only. The light emitting diodes (LED's) are not replaceable individually. If LED replacement is needed, send the cluster to an AC Delco service center. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.
  1. Remove the instrument panel cluster (IPC). Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gages and Console.
    2. Fig 1: Locating IPC Rear Cover Plate
    GM367197Courtesy of GENERAL MOTORS CORP.
  2. Unclip the IPC rear cover plate by prying gently on the tabs with a screwdriver.
  3. Remove rear cover plate from the IPC.
    4. Fig 2: Locating I/P Lamp & Base Assembly
    GM397712Courtesy of GENERAL MOTORS CORP.
  4. Remove the bulb and the base assembly by turning clockwise and pulling outward.
scientia non olet · About LEMON Manuals