LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating I/P Accessory Left Trim Panel
    GM816356Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left in Instrument Panel, Gages, and Console.
  2. Fig 2: Locating Headlamp Switch
    GM815923Courtesy of GENERAL MOTORS CORP.
  3. Pull out the headlamp switch in order to release the clips.
  4. Remove the headlamp switch.
  5. Fig 3: Locating Headlamp Switch Electrical Connector
    GM832807Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector.