LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 701 (Entertainment) >> Repair Instructions >> Radio Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Radio
    GM815852Courtesy of GENERAL MOTORS CORP.
  1. Align the radio with the center stack and mounting holes.
    2. Fig 2: Electrical Connectors & Antenna Connectors
    GM815848Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors and the antenna connectors from the rear of the radio.
    3. Fig 3: Radio & I/P Center Stack
    GM832843Courtesy of GENERAL MOTORS CORP.
  3. Install the bolts that hold the radio to the instrument panel center stack.
  4. Align the trim panel instrument panel center to instrument panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gages and Console.
  5. Align and move the forward center console in place with the center console bracket. Refer to Console Replacement in Instrument Panel, Gages and Console.
  6. Calibrate the new radio assembly. Refer to Service Programming System (SPS) Description in Programming.
scientia non olet · About LEMON Manuals