LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Starters) >> Symptom List >> Charge Indicator Always On

Charge Indicator Always On

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Did you perform the Engine Electrical Diagnostic System Check? If yes, go to next step. If no, go to DIAGNOSTIC SYSTEM CHECK - ENGINE ELECTRICAL .
  2. Start the engine. Does the battery charge indicator remain illuminated after the 5-second bulb check? If yes, go to next step. If no, problem is intermittent.
  3. Install a scan tool. With a scan tool, observe the Battery Voltage parameter in the Instrument Panel Cluster data list. Does the voltage measure within 10-15 V? If yes, go to next step. If no, go to Charging System Test in GENERATORS & REGULATORS .
  4. Replace the instrument panel cluster. Refer to Instrument Panels . Did you complete the replacement? If yes, go to next step.
  5. Operate the system in order to verify the repair. Did you correct the condition? If yes, system is okay. If no, go to step  2.