LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Starters) >> Removal & Installation >> Ground Strap Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ground strap to the stud.
  2. Install the ground strap nut to the stud at the front of dash. Tighten the nut to 9 N.m (80 lb in).
  3. Raise the vehicle.
  4. Position the ground strap and engine wiring harness ground.
  5. Install the engine wiring harness ground bolt. Tighten the bolt to 16 N.m (12 lb ft).
  6. Install the left hand catalytic convert.
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals