LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 227 (Starters) >> Removal & Installation >> Battery Negative Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable from the battery. See BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (SINGLE BATTERY) .
  2. Raise and suitably support the vehicle with safety stands.
  3. Remove the engine protection shield.
  4. Remove the forward lamp wiring harness ground/negative cable bolt.
  5. Remove the engine wiring harness ground/negative cable bolt.
  6. Remove the negative battery cable.
    Fig 1: Locating Negative Battery Cable-To-Engine Connection
    G00357721Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals