LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System And TCS >> Repair Instructions >> Wheel Speed Sensor Replacement - Rear >> Removal Procedure

Removal Procedure

    Fig 1: Rear Wheel Speed Sensor & Shim
    GM913375Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the electrical connector.
  3. Remove the wheel speed sensor retaining bolt.
    4. IMPORTANT: If a shim was removed when the wheel speed sensor was removed, it must be reinstalled to ensure proper operation.
  4. Remove the wheel speed sensor and shim if present.
scientia non olet · About LEMON Manuals