LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Installation Procedure

Installation Procedure

  1. Install the windshield reveal molding to the windshield pillar.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Windshield Reveal Molding & Windshield Pillar
    GM870622Courtesy of GENERAL MOTORS CORP.
  2. Install the screws to the windshield reveal molding.

    Tighten:  Tighten the screws to the windshield reveal molding to 2 N.m (18 lb in).

  3. Install the front door sealing weatherstrip (1) to the pinchweld.
  4. Close the door.
scientia non olet · About LEMON Manuals