Removal Procedure
- Open the door.
- Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
- Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
- Remove the window run channel. Refer to Window Run Channel Replacement - Front Door .
- Disconnect the lock actuator electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the outside door handle rod (1) by releasing the retaining clip on the door latch.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the lock cylinder rod by releasing the retaining clip (1).
- Remove the manual locking rod from the door by releasing the rod from the retainers.
Courtesy of GENERAL MOTORS CORP.
- Remove the fasteners (2) retaining the door latch (1) to the door.
- Remove the door latch (1).