Installation Procedure

Fig 1: Rear Door Fasteners

Courtesy of GENERAL MOTORS CORP.

With an assistant, align the door to the vehicle and install the fasteners (1) that retain the door hinge halves together.

NOTE: Refer to Fastener Notice in Cautions and Notices

Install the fasteners that retain the door check link to the body. Refer to Door Check Link Replacement .
Tighten: Tighten the fasteners to 9 N.m (7 lb ft)
Install the wiring harness. Refer to Wiring Harness Replacement - Rear Door .
Transfer components as necessary.
Install the water deflector. Refer to Water Deflector Replacement - Rear Door .
Install the door trim panel. Refer to Trim Panel Replacement - Side Rear Door .