LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System >> Repair Instructions >> Door Handle Replacement - Front Outside >> Installation Procedure

Installation Procedure

  1. Position the door handle in place on the door.
    2. Fig 1: Front Outside Door Handle
    GM838664Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 nuts (1) that retain the door handle to the door.

    Tighten:  Tighten the nuts to 9 N.m (7 lb ft).

    3. Fig 2: Front Outside Door Handle Rod
    GM838657Courtesy of GENERAL MOTORS CORP.
  3. Connect the outside door handle rod (1) by securing the retention clip (2).
    4. Fig 3: Lock Cylinder Rod
    GM838673Courtesy of GENERAL MOTORS CORP.
  4. Connect the lock cylinder rod by securing the retainer clip (1).
  5. Install the window. Refer to Window Replacement - Front Door .
  6. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  7. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door .
  8. Operate the door handle to check for proper operation.
scientia non olet · About LEMON Manuals