LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> Transmission >> Transfer Case - BW 4484 >> Repair Instructions >> Transfer Case Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Transfer Case Shield
    GM832919Courtesy of GENERAL MOTORS CORP.
  1. Install the transfer case shield to the cross member.
    2. NOTE: Refer to Fastener Notice .
  2. Install the transfer case shield mounting bolts the cross member.

    Tighten:  Tighten the mounting bolts to 30 N.m (23 lb ft).

  3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
scientia non olet · About LEMON Manuals