Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the muffler and resonator assembly to the vehicle and install into the rubber mounts.
- Install the new gasket onto the exhaust pipe rear flange.
- Assemble the intermediate pipe to exhaust pipe, install new nuts and tighten.
Tighten: Tighten the exhaust pipe-to-intermediate pipe nuts to 30 N.m (22 lb ft).
- Check the entire exhaust system for leaks.
NOTE:
Refer to Fastener Notice
.