LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (Engine Exhaust System) >> Repair Instructions >> Exhaust Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Positioning Shield Onto The Vehicle
    GM927081Courtesy of GENERAL MOTORS CORP.
  1. Position the exhaust heat shield to the vehicle and place the rear of the shield under the catalytic converter heat shield.
    2. NOTE: Refer to Fastener Notice .
  2. Install the exhaust heat shield nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Install NEW exhaust heat shield rivets.
  4. Install the manifold exhaust pipe. Refer to Exhaust Manifold Pipe Replacement (3.5L (L66)) .
  5. Install the catalytic converter. Refer to Catalytic Converter Replacement (2.2L (L61) and 2.4L (LAT)) .
scientia non olet · About LEMON Manuals