LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 797 (Disc Brake System) >> Repair Instructions >> Brake Caliper Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not move the vehicle until a firm brake pedal is obtained. Failure to obtain a firm pedal before moving vehicle may result in personal injury.
    Fig 1: View Of Brake Caliper Pin Bolts
    GM796146Courtesy of GENERAL MOTORS CORP.
  1. Remove the brake caliper from the brake caliper bracket. Refer to Brake Caliper Replacement .
    2. Fig 2: Supporting Brake Caliper With Heavy Mechanic's Wire
    GM756418Courtesy of GENERAL MOTORS CORP.
    NOTE: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.
  2. Support the brake caliper (1) with heavy mechanic's wire, or equivalent; do NOT disconnect the hydraulic brake flexible hose from the caliper.
    3. Fig 3: Identifying Brake Pads, Bracket & Retainers
    GM680415Courtesy of GENERAL MOTORS CORP.
  3. Remove the brake pads (2) from the brake caliper bracket (3).
  4. Remove the brake pad retainers (1) from the brake caliper bracket (3).
    5. Fig 4: View Of Brake Caliper Bracket & Mounting Bolts
    GM756937Courtesy of GENERAL MOTORS CORP.
  5. Remove the brake caliper bracket bolts (2).
  6. Remove the brake caliper bracket (1) from the knuckle.
scientia non olet · About LEMON Manuals