Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Switch To Side Trim Panel & Screws

Courtesy of GENERAL MOTORS CORP.

Install the switch to the side trim panel.

Fig 2: Panel Side To Seat Frame

Courtesy of GENERAL MOTORS CORP.

Install a new barrel clip (1) to the trim panel upper barrel post (2).
Connect the switch harness.

Fig 3: Switch To Side Trim Panel & Screws

Courtesy of GENERAL MOTORS CORP.

Install the seat side trim panel.
- Push the barrel post with clip through the hole in the seat cover and into the seat frame.
- Install the front and rear trim panel attaching screws.

Fig 4: Recliner Handle To Reclining Mechanism Shaft

Courtesy of GENERAL MOTORS CORP.

Install the seat back recliner handle.
1. Position the handle retaining spring clip into the lock position.
2. Snap the handle onto the reclining mechanism shaft.