LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Condenser Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Remove the transmission oil cooler. Refer to Transmission Fluid Auxiliary Cooler Replacement in Automatic Transmission - 4L60-E.
  3. Remove the power steering cooler. Refer to Power Steering Cooler Replacement in Power Steering System.
  4. Remove the bolt and nut from the left hood spring.
  5. Remove the bolt and nut from the right hood spring.
    6. Fig 1: Discharge Hose Nut & Condenser
    GM798938Courtesy of GENERAL MOTORS CORP.
  6. Remove the nut (1) from the condenser (2).
  7. Remove the compressor discharge hose assembly (3) from the condenser (2).
    8. Fig 2: Evaporator Tube & Condenser
    GM798941Courtesy of GENERAL MOTORS CORP.
  8. Remove the evaporator tube nut (2) from the condenser (1).
  9. Remove the evaporator tube (3) from the condenser (1).
  10. Remove the bolts (2) from the condenser (3).
    11. Fig 3: Condenser & Mounting Bolts
    GM798933Courtesy of GENERAL MOTORS CORP.
  11. Remove the condenser (3) from the vehicle.
scientia non olet · About LEMON Manuals