LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 611 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Mounting Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: A/C Compressor Bracket
    GM363185Courtesy of GENERAL MOTORS CORP.
  1. Install the A/C compressor bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the A/C compressor bracket mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the A/C belt tensioner.
  4. Install the A/C belt tensioner bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  5. Install the A/C compressor. Refer to Compressor Replacement .
scientia non olet · About LEMON Manuals